Roll Bender - R-H55
Click Image to Enlarge
Mild Steel
Size
Min Diameter
Flat Bar (Hard Way)
4” (.472)
31.5”
Flat Bar (Easy Way)
4 3/4” (.78)
31.5”
Solid Square Rod:
1 3/4”
31.5”
Solid Round Rod:
1 3/4”
31.5”
Round Tube:
3 1/8” (.078)
59.05”
Pipe:
2 1/2" Sch. 10
58”
Rectangular Tube:
3-1/8” x 1-1/2” (.125)
98.42”
Box Section:
2 3/8” (.125)
102.36”
Angle Iron(Leg Out)
3”x 3” (.169)
31.5”
Angle Iron(Leg In)
3” x 3” (.169)
31.5”
T-Bar(Leg Out:
2-3/4” x 2-3/4” (.312)
31.5”
T-Bar(Leg In):
2-3/4” x 2-3/4” (.312)
31.5”
Channel(Legs Out)
4 3/4”
33.64”
Channel(Legs In)
4 3/4”
33.64”
Metric
Mild Steel
Max. Size OD/Wall
Min. Dia.
Flat Bar (Hard Way)
102 x 12 mm
800 mm
Flat Bar (Easy Way)
121 x 20 mm
800 mm
Solid Square Rod:
44 mm
800 mm
Solid Round Rod:
44 mm
800 mm
Round Tube:
79 x 2 mm
1500 mm
Pipe:
3 mm
1473 mm
Rectangular Tube:
79 x 38 x 3 mm
2500 mm
Box Section:
60 x 3 mm
2600 mm
Angle Iron (Leg Out)
76 x 76 x 3 mm
800 mm
Angle Iron(Leg In)
76 x 76 x 3 mm
800 mm
T-Bar (Leg Out)
70 x 70 x 8 mm
800 mm
T-Bar (Leg In)
70 x 70 x 8 mm
800 mm
Channel (Legs Out)
121 mm
854 mm
Channel(Legs In)
121 mm
854 mm
Electrical Equipment and Controls
Electronics
400V Three-Phase @ 50Hz, 5 1/4 HP
Weight
740 Kg (1631.42 lbs.)
Dimensions (l x w x h)
1300mm x 890mm x 1570mm (51.18" x 35.04" x 61.81")
Specifications
Shaft Diameter
55mm (2.165")
Roll Diameter
170mm (6.693")
Shaft Speed
11 rpm
Hardened Rolls for standard profiles included with machine. Forward-reverse foot pedal controls, 2-rolls powered. Directly Gear Driven with Variable Speed Control..
Technical Specifications and Standard Equipment
- Two Driven Rolls
- Programmable digital readout for top roll
- Rolls are hardened
- Rolls Shafts are a Special Steel material that is hardened and ground
- Standard Rolls
- Guide Rolls
- Horizontal and Vertical Working Position
- Foot Pedal
- Users manual book
Optional Accessories
- Pipe / Tube Bending Rolls
- Angle Bending Rolls
