Roll Bender - R-M40
Click Images to Enlarge
Mild Steel
Max. Size OD/Wall
Min. Dia.
Flat Bar (Hard Way)
2”(.375)
19.70”
Flat Bar (Easy Way)
2 1/4”(.375)
19.70”
Solid Square Rod:
1 1/4"
19.70”
Solid Round Rod:
1 3/4”
19.70”
Round Tube:
2”(.078)
27.55”
Pipe:
1" Sch. 10
27.50”
Rectangular Tube:
2” x 1 1/4”(.078)
39.37”
Square Tube:
1 1/2”(.078)
39.37”
Angle Iron(Leg Out)
1 1/2” x 1 1/2”(.196)
19.68”
Angle Iron(Leg In):
1 1/2” x 1 1/2”(.196)
19.68”
T-Bar(Leg Out)
1 1/2” x 1 1/2”(.196)
19.68”
T-Bar(Leg In)
1 1/2” x 1 1/2”(.196)
19.68”
Channel(Legs Out)
2"
19.68”
Channel(Legs In)
2"
32.62"
Metric
Mild Steel
Max. Size OD/Wall
Min. Dia.
Flat Bar (Hard Way):
51 x 10 mm
500 mm
Flat Bar (Easy Way):
57 x 10 mm
500 mm
Solid Square Rod:
32 mm
500 mm
Solid Round Rod:
44 mm
500 mm
Round Tube:
51 x 2 mm
700 mm
Pipe:
33 x 2.8 mm
699 mm
Rectangular Tube:
51 x 32 x 2 mm
1000 mm
Square Tube:
38 x 38 x 2 mm
1000 mm
Angle Iron (Leg Out):
38 x 38 x 5 mm
500 mm
Angle Iron (Leg In):
38 x 38 x 5 mm
500 mm
T-Bar(Leg Out:
38 x 38 x 5 mm
500 mm
T-Bar(Leg In):
38 x 38 x 5 mm
500 mm
Channel(Legs Out):
51 x 5 mm
500 mm
Channel(Legs In):
51 x 5 mm
829 mm
Electrical Equipment and Controls
Electronics
240V Single-Phase @ 50Hz, 2 HP
Weight
260Kg (573.20 lbs.)
Dimensions (l x w x h)
660mm x 860mm x 1400mm
(26 x 34 x 55 In)
Specifications
Shaft Diameter
30mm (1.181")
Roll Diameter
130mm (5.118")
Shaft Speed
Variable 10.6-21.2 rpm
Hardened Rolls for standard profiles included with machine. Forward-reverse foot pedal controls, 2-rolls powered. Directly Gear Driven with Variable Speed Control.
Technical Specifications and Standard Equipment:
- Two Driven Rolls
- Variable Speed
- Rolls are hardened
- Shafts are Special Steel material hardened an ground
- Standard Rolls
- Guide Rolls
- Horizontal and Vertical Working Position
- Foot Pedal
- User’s manual book
Optional Accessories:
- Pipe/ Tube Bending Rolls
- Profile Bending Rolls
- Angle Bending Rolls
