BS-350SA
Semi-Automatic Horizontal Band Saw

Lease to own for

• Semi- Automatic down feed and up feed
• Hydraulic clamping vise
• Cast iron saw head provides rigidity and swivels in two directions, 0-60 degrees (R) and 0-45 degrees (L)
• Direct gear drive helps extend saw blade life, and allows saw head to make more accurate cuts and cut faster.
• Dual descent modes: 1 -Manual descent mode is operated by pulling down on handle and actuating trigger switch. 2- Hydraulic descent feed can be adjusted by operator.
• Powerful coolant pump cools blade and assists chip removal system. We recommend using a petroleum or synthetic based coolant mixture that is typically mixed with water in a 1:10 ratio.
• Broken blade tension devise shuts down machine if blade breaks.

The gear driven BS-350SA is a 10-1/2" dual miter Semi Automatic Band Saw and is the perfect saw for cutting at 90 degrees or other miter angles. This saw has a dual angle head capable of cutting 0-60 degrees right and 0-45 degrees left, making it one of the most versatile bandsaws on the market. Quick releases allow the operator to change the miter angle in seconds. The vise clamp uses a hand wheel coupled to a low ratio acme screw for positioning and a quick release and load hydraulic clamping system. Each gear driven semi automatic metal cutting bandsaw we offer has variable speed, miter heads, and a hydraulic controlled descent device for perfect feeds and longer blade life. Our bandsaws have DC variable speed drives that offer consistent torque even at slower speeds, which increases blade life. Our band saws are constructed of a heavy cast iron saw head and base and the blades are guided via a tungsten carbide insert offering rigidity and accuracy. Each band saw has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks. This machine is perfect for cutting solid bar stock, as well as tubing and pipe. The BS-350SA easily cuts mild and stainless steel, aluminum, chromoly, and bronze. Plastics may also be cut with a Baileigh band saw.

The BS-350SA�s hydraulic descent has a down feed adjustment for feed pressure. The saw head is automatically lifted when the cut is complete and is ready for the next cut. The hydraulic descent has a down feed adjustment for feed pressure. The BS-350SA can cut up to 8-1/2"x13-3/4" rectangle. This model has service requirements of 220V, Single Phase, 60 Hertz. This series of horizontal band saw comes standard with a variable speed drive allowing the operator to fine tune the blade speed from 114' to 262' / min. The BS-350SA metal cutting saw requires a 1" wide saw blade by .035" wall thickness that is 125" long, making this series a very precise miter saw. We ship our mitering bandsaws with quality saw blades and recommend using a quality replacement blade manufactured by the likes of Lenox®, Starrett®, or Wikus®. We carry this machine in stock for same day shipments.