|
|
R-H45 Roll Bender
 |
Lease to own for |
 |
(Click Picture to Zoom)
| SPECIFICATIONS: R-H45 |
Shaft Diameter |
45mm (1.772") |
Roll Diameter |
148mm (5.827") |
Shaft Speed |
12 rpm |
Hardened Rolls for standard profiles included with machine.
Forward-reverse foot pedal controls, 3-rolls powered.
Directly Gear Driven with Variable Speed Control. |
| Capacities: R-H45 Roll Bending Machine |
| Mild Steel |
Max. Size OD/Wall |
Min. Dia. |
Flat Bar (Hard Way): |
3-1/4” (.393) |
27.55” |
Flat Bar (Easy Way): |
3 7/8” (.75) |
27.55” |
Solid Square Rod: |
1-1/2” |
27.55” |
Solid Round Rod: |
1-1/2” |
27.55” |
Round Tube: |
2-3/4” (.078) |
59.05” |
Pipe: |
2” Sched 10 |
47.2” |
Rectangular Tube: |
2 3/4” x 1 1/8” (.078) |
59.05” |
Square Tube: |
2 (.098)” |
51.18” |
Angle Iron (Leg Out): |
1 3/4” x 1 3/4” (.196) |
27.55” |
Angle Iron (Leg In): |
1 3/4” x 1 3/4” (.196) |
27.55” |
T-Bar (Leg Out): |
2 1/4” x 2 1/4” (.275) |
23.62” |
T-Bar (Leg In): |
2 1/4” x 2 1/4” (.275) |
31.5” |
Channel (Legs Out): |
4” |
31.49” |
Channel (Legs In): |
4” |
31.49” |
| ELECTRICAL EQUIPMENT AND CONTROLS |
| Electronics: |
240V Single-Phase @ 50Hz, 3 HP |
| Weight: |
540Kg (1190.50 lbs.) |
| Dimensions (l x w x h): |
1200mm x 770mm x 1450mm
(47.24" x 30.31" x 57.09") |
Technical Specifications and Standard Equipment
- Two Driven Rolls
- Programmable digital readout for top roll
- Rolls are hardened
- Rolls Shafts are a Special Steel material that is hardened and ground
- Standard Rolls
- Guide Rolls
- Horizontal and Vertical Working Position
- Foot Pedal
- Users manual book
Optional Accessories
- Pipe / Tube Bending Rolls
- Angle Bending Rolls
|
