|
|
R-H55 Roll Bender
 |
Lease to own for |
 |
(Click Picture to Zoom)
| SPECIFICATIONS: R-H55 |
Shaft Diameter |
55mm (2.165") |
Roll Diameter |
170mm (6.693") |
Shaft Speed |
11 rpm |
Hardened Rolls for standard profiles included with machine.
Forward-reverse foot pedal controls, 2-rolls powered.
Directly Gear Driven with Variable Speed Control. |
| Capacities: R-H55 Roll Bending Machine |
Mild Steel |
Max. Size OD/Wall |
Min. Dia. |
Flat Bar (Hard Way): |
4” (.472) |
31.5” |
Flat Bar (Easy Way): |
4 3/4” (.78) |
31.5” |
Solid Square Rod: |
1 3/4” |
31.5” |
Solid Round Rod: |
1 3/4” |
31.5” |
Round Tube: |
3 1/8” (.078) |
59.05” |
Pipe: |
2 1/2" Sched 10 |
58” |
Rectangular Tube: |
3-1/8” x 1-1/2” (.125) |
98.42” |
Square Tube: |
2 3/8” (.125) |
102.36” |
Angle Iron (Leg Out): |
3”x 3” (.169) |
31.5” |
Angle Iron (Leg In): |
3” x 3” (.169) |
31.5” |
T-Bar (Leg Out): |
2-3/4” x 2-3/4” (.312) |
31.5” |
T-Bar (Leg In): |
2 3/4” x 2 3/4” (.312) |
31.5” |
Channel (Legs Out): |
4 3/4” |
33.64” |
Channel (Legs In): |
4 3/4” |
33.64” |
ELECTRICAL EQUIPMENT AND CONTROLS |
Electronics: |
400V Three-Phase @ 50Hz, 5¼ HP |
Weight: |
740Kg (1631.42 lbs.) |
Dimensions (l x w x h): |
1300mm x 890mm x 1570mm
(51.18" x 35.04" x 61.81") |
Technical Specifications and Standard Equipment
- Two Driven Rolls
- Programmable digital readout for top roll
- Rolls are hardened
- Rolls Shafts are a Special Steel material that is hardened and ground
- Standard Rolls
- Guide Rolls
- Horizontal and Vertical Working Position
- Foot Pedal
- Users manual book
Optional Accessories
- Pipe / Tube Bending Rolls
- Angle Bending Rolls
|
