|
|
R-M55 Roll Bender
 |
Lease to own for |
 |
(Click Picture to Zoom)
SPECIFICATIONS: R-M55 |
Shaft Diameter |
50mm (1.969") |
Roll Diameter |
148mm (5.827") |
Shaft Speed |
Variable 13.6-27.2 rpm |
Hardened Rolls for standard profiles included with machine.
Forward-reverse foot pedal controls, 2-rolls powered.
Directly Gear Driven with Variable Speed Control. |
Capacities: R-M55 Roll Bending Machine |
Mild Steel |
Max. Size OD/Wall |
Min. Dia. |
Flat Bar (Hard Way): |
2 1/4” (.375) |
19.68” |
Flat Bar (Easy Way): |
3” (.60) |
23.62” |
Solid Square Rod: |
1 3/8 ” |
23.62” |
Solid Round Rod: |
1 3/8” |
23.62” |
Round Tube: |
2 1/4” (.078) |
47.24” |
Pipe: |
1 1/2” Sched 10 |
39” |
Rectangular Tube: |
2 1/4” x 1 1/8” (.078) |
51.18” |
Square Tube: |
1 3/4” (.078) |
47.24” |
Angle Iron (Leg Out): |
1 1/2” x 1 1/2” (.187) |
23.62” |
Angle Iron (Leg In): |
1 1/2” x 1 1/2” (.187) |
23.62” |
T-Bar (Leg Out): |
2” x 2” (.250) |
23.62” |
T-Bar (Leg In): |
2” x 2” (.250) |
23.62” |
Channel (Legs Out): |
3 1/8” |
27.55” |
Channel (Legs In): |
3 1/8” |
27.55” |
ELECTRICAL EQUIPMENT AND CONTROLS |
Electronics: |
220V Single-Phase @ 50Hz, 2 HP |
Weight: |
400Kg (881.85 lbs.) |
Dimensions (l x w x h): |
950mm x 910mm x 1270mm
(37.41" x 35.83" x 50.00") |
Technical Specifications and Standard Equipment
- Two Driven Rolls
- Variable Speed
- Rolls are hardened
- Rolls Shafts are a Special Steel material that is hardened and ground
- Standard Rolls
- Guide Rolls
- Horizontal and Vertical Working Position
- Foot Pedal
- Users manual book
Optional Accessories
- Pipe / Tube Bending Rolls
- Angle Bending Rolls
|
